Grupos geradores silenciados LINKPOWER
Grupos acústicos resistentes ao tempo para energia de emergência comercial, residencial e de projetos.
Explore →Linhas de produtos
Grupos geradores abertos LINKPOWER
Grupos industriais de fácil manutenção para salas técnicas, fábricas e sistemas integrados.
Open-type sets provide direct maintenance access and flexible integration into an engineered generator room. Engine, alternator, skid, radiator, control panel, starting system and vibration isolation are matched as one package.
- Power Range
- 15–3,750 kVA
- Frequency
- 50 Hz / 60 Hz
- Voltage Range
- Low- or medium-voltage project configuration
- Duty
- Standby, prime or continuous by selected model
- Engine Options
- Available on confirmed configuration
Available Power Range
20–50 kVA50–100 kVA100–250 kVA250–500 kVA500–1000 kVA1000 kVA+
Key Configuration Options
- Engine platform
- Alternator
- Controller
- ATS
- Base fuel tank
- Soundproof canopy
- PMG
- Parallel operation
- Remote monitoring
Configurações disponíveis
- 15-100 kVA light industrial
- 110-500 kVA commercial and industrial
- 550-1,500 kVA heavy duty
- 1,600-3,750 kVA high-output project sets
Specifications
| Faixa de potência | 15-3,750 kVA family range |
|---|---|
| Regime | Standby, prime or continuous by selected model |
| Frequência | 50 Hz / 60 Hz |
| Tensão / fases | Low- or medium-voltage project configuration |
| Fator de potência | 0.8 three phase typical |
| Rotação nominal | 1,500 / 1,800 rpm typical; model-dependent alternatives |
| Refrigeração | Radiator, remote radiator or heat-exchanger options |
| Controle | Auto mains failure, parallel and synchronizing options |
| Carenagem | Open skid; room ventilation and exhaust designed separately |
| Opções | ATS, day tank, remote cooling, load sharing, neutral-earth arrangement, emissions package |
Family-range data for initial selection. The final engine, alternator, controller, rating, fuel consumption, dimensions, emission level and noise data are confirmed in the project quotation and datasheet.
Applications
- Factories and workshops
- Data, utility and plant rooms
- Mining, oil and gas, and construction support
Frequently Asked Questions
What size generator do I need?
Selection starts with the running load, the largest motor-starting demand, duty and required reserve. Send the load list when the required kVA is not yet known.
Do you provide 50 Hz and 60 Hz generators?
Yes. Frequency, rated speed, voltage and protection are confirmed for the destination electrical standard.
Can the voltage be customized?
Voltage and phase are configured against the confirmed generator, alternator and project requirements.
Can ATS be included?
ATS can be included when its current rating, pole arrangement, mains/generator logic and installation scope are confirmed.
Can you supply prime and standby ratings?
Prime and standby requirements can be quoted. The selected rating must match the operating profile and applicable engine data.
Can the generator be configured for high temperature or altitude?
Yes, subject to confirmed ambient temperature, altitude and derating data for the selected configuration.
Explore
Geradores móveis e rebocáveis LINKPOWER
Soluções rebocáveis para obras temporárias, locação e implantação rápida.
Explore →
Sistemas de energia em contêiner LINKPOWER
Geração de alta potência para indústria, infraestrutura e locais remotos.
Explore →